Transmission Case - Suzuki Baleno Manual

7B1-144 AUTOMATIC TRANSMISSION
1. Cylindrical roller bearing
2. Retainer
3. Lubrication tube
4. Oil reservoir plate
5. Magnet
5) Tighten roller bearing retainer with bolt.
Tightening Torque
(a): 13 N·m (1.3 kg-m, 9.5 lb-ft)
6) Install transmission lubrication tube and clamp.
7) Tighten them with bolt.
Tightening Torque
(b): 5.5 N·m (0.55 kg-m, 4.0 lb-ft)
8) Tighten oil reservoir plate (with three magnets installed) with
bolts.
Tightening Torque
(c): 5.5 N·m (0.55 kg-m, 4.0 lb-ft)

TRANSMISSION CASE

1. Cylindrical
roller
REMOVAL
bearing
1) Remove cylindrical roller bearing, using special tools.
Special Tool
(A): 09942-15511
(B): 09941-54911 (remover)
(C): 09921-26010 (coller)
NOTE:
Never reuse removed bearing.
INSTALLATION
1) Apply A/T fluid to outer surface of cylindrical roller bearing.
2) Tap cylindrical roller bearing, using special tools.
Special Tool
(A): 09924-74510
(B): 09944-88210