3G-18 SUSPENSION CONTROL SYSTEM
SUSPENSION CONTROL MODULE AND ITS
CIRCUIT CHECK
Suspension control module can be checked at suspension control
module couplers by measuring voltage and resistance.
CAUTION:
Suspension control module cannot be checked by itself.
It is strictly prohibited to connect voltmeter or ohmmeter
to suspension control module with coupler discon-
nected from it.
VOLTAGE CHECK
1) Remove suspension control module from body.
2) Connect couplers to suspension control module.
3) Check voltage at each terminal of couplers connected.
NOTE:
As each terminal voltage is affected by the battery voltage,
confirm that it is 11V or more when ignition switch is ON.
1. Suspension control module
2. Suspension control module coupler