Suzuki Baleno Manual page 565

1. Differential assembly
2. Shim(s)
1. Rear case bolt
1. Differential side oil seal
INSTALLATION OF TRANSFER & DIFFERENTIAL
1) Install differential assembly and shim(s) into transmission case.
2) Clean mating surfaces of both transmission case and rear case,
coat mating surface of transmission case with sealant evenly
then mate it with rear case.
"A": SUZUKI BOND No1215, 99000-31110
3) Tighten rear case bolts to specified torque.
Tightening Torque
(a): 19 N·m (1.9 kg-m, 14.0 lb-ft)
4) Install differential side oil seals by using special tool and ham-
mer, and then apply grease to its lip.
NOTE:
Face oil seal spring side inward.
Distance "a": 1.0 – 1.5 mm (0.04 – 0.06 in.)
Special Tool
(A): 09913-75810
"A": SUZUKI SUPER GREASE A, 99000-25010
MANUAL TRANSMISSION 7A2-43