Suzuki Baleno Manual page 550

7A2-28 MANUAL TRANSMISSION
1. Shift fork shaft oil seal
1. Spacer
Rear Case
1) If shift fork shaft oil seal is removed, push in new oil seal with
grease applied to oil seal lip by using 1 7 mm socket.
"A": SUZUKI SUPER GREASE A, 99000-25010
2. 17 mm socket
Adjustment
Bevel pinion bearing shim adjustment
1) Measure drive pinion spacer length A.
3) Measure level difference B between other outer race plus outer
race and inner race of bevel pinion bearing (at both front and
rear).
Level difference at front bearing plus other outer race: B
Level difference at rear bearing plus other outer race: B'
Special Tool
(A): 09922-77241
1. Other outer
race
2. Inner race
3. Outer race
4) Measure other outer race length C.
Level difference at front bearing: B – C = D
Level difference at rear bearing : B' – C = D'
D + D' = E
1. Outer race
5) Measure dimension F of differential carrier.
E + F = G
Measured level difference = G – A