Suzuki Baleno Manual page 801

1. Snap ring 3. Planetary gear assembly
2. Overdrive clutch hub 4. Thrust bearing race
1. Thrust bearing race
2. Thrust needle roller bearing
3. Rear planetary ring gear flange
4. Snap ring
1. One-way clutch retainer
2. Thrust needle roller bearing 3. Snap ring
1. One-way clutch roller
2. One-way clutch outer race
3. Rear planetary ring gear subassembly
12) Coat two thrust bearing races with A/T fluid.
13) Install planetary gear assembly and overdrive clutch hub with
snap ring.
14) Install two thrust bearing races.
15) Check operation of one-way clutch.
DISASSEMBLY – No.0 (F0)
1) Remove thrust bearing race.
Reference value for race
Outside diameter : 29.4 mm (1.16 in.)
Inside diameter : 19.6 mm (0.77 in.)
Thickness : 0.8 mm (0.03 in.)
2) Remove thrust needle roller bearing
Reference value for bearing
Outside diameter : 70.8 mm (2.79 in.)
Inside diameter : 57.2 mm (2.25 in.)
Thickness : 2.7 mm (0.11 in.)
3) Remove rear planetary ring gear flange by removing snap ring.
4) Remove one-way clutch retainer with thrust needle roller bear-
ing by removing snap ring.
INSPECTION
Visually check the following parts for scratches or discoloration.
D Outer surface of one-way clutch roller.
D Inner surface of one-way clutch outer race.
D Inner surface of rear planetary ring gear subassembly.
AUTOMATIC TRANSMISSION 7B1-117