Toyota Celica 2005 Repair Manual page 1895

2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U341E)
5.
Install the shift lock unit with the 2 screws.
D07825
6.
(a)
(b)
(c)
(d)
(e)
D07824
7.
(a)
(b)
(c)
D07823
8.
(a)
(b)
D07822
(c)
(d)
(e)
HINT:
Coat the threads of screws with sealant.
D07821
− FLOOR SHIFT ASSEMBLY
INSTALL SHIFT LOCK UNIT
INSTALL LOWER POSITION INDICATOR HOUSING
Apply MP grease on the spring.
Install the spring and shift lock release button.
Install the bulb and bulb cap to the indicator lamp wire
sub−assembly.
Install the lower position indicator housing with the 4
screws.
Install the indicator lamp wire sub−assembly.
INSTALL UPPER POSITION INDICATOR HOUSING
Install the 3 slide covers to the lower position indicator
housing, as shown in the illustration.
Install the control position indicator plate.
Install the upper position indicator housing.
INSTALL SHIFT LEVER KNOB SUB−ASSEMBLY
Apply MP grease on the compression spring.
Install the compression spring, shift lever knob button
guide, shift lever knob button and shift lever stop pin.
Install the No. 2 slide cover.
Install the O/D main switch
Install the shift lever knob sub−assembly with the 2
screws.
Sealant:
Part No. 08833−00080, THREE BOND 1344, LOCTITE
242 or equivalent
1894
AX−25