Toyota Celica 2005 Repair Manual page 1647

LU−14
2005 CELICA (RM1131U)
LUBRICATION − OIL PUMP
INSTALLATION
1. INSTALL OIL PUMP
(a) Place a new gasket on the cylinder block.
(b) Engage the spline teeth of the oil pump drive rotor with the
large teeth of the crankshaft, and slide the oil pump.
(c) Install the oil pump with the 5 bolts.
Torque: 9.0 N·m (92 kgf·cm, 80 in.·lbf)
2. INSTALL CRANKSHAFT TIMING SPROCKET AND
TIMING CHAIN (See pages EM−26)
B00171
3. FILL ENGINE WITH OIL
4. START ENGINE AND CHECK FOR LEAKS
5. RECHECK ENGINE OIL LEVEL
1646
LU02R−13