Toyota Celica 2005 Repair Manual page 1957

SA−50
2005 CELICA (RM1131U)
SUSPENSION AND AXLE
INSTALLATION
1. INSTALL LOWER BALL JOINT
(a) Install the lower ball joint and tighten the nut.
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
(b) Install a new cotter pin.
If the holes for the cotter pin are not aligned, tighten the nut fur-
ther up to 60 °.
2. INSTALL STEERING KNUCKLE WITH AXLE HUB
(See page SA−17)
R08850
3. CHECK ABS SPEED SENSOR SIGNAL
(See page DI−836)
4. CHECK FRONT WHEEL ALIGNMENT
(See page SA−5)
1956
− FRONT LOWER BALL JOINT
SA10F−04