Toyota Celica 2005 Repair Manual page 1636

Hide thumbs Also See for Celica 2005:
Table of Contents

Advertisement

3/4
Turn
2005 CELICA (RM1131U)
LUBRICATION
REPLACEMENT
CAUTION:
S
S
S
1.
2.
(a)
(b)
3.
(a)
SST
(b)
(c)
(d)
B00182
(e)
(f)
4.
SST
(a)
B00181
OIL AND FILTER
Prolonged and repeated contact with mineral oil will
result in the removal of natural fats from the skin,
leading to dryness, irritation and dermatitis. In addi-
tion, used engine oil contains potentially harmful
contaminants which may cause skin cancer.
Exercise caution in order to minimize the length and
frequency of contact of your skin to used oil. Wear
protective clothing and gloves. Wash your skin thor-
oughly with soap and water, or use water−less hand
cleaner, to remove any used engine oil. Do not use
gasoline, thinners, or solvents.
In order to preserve the environment, used oil and
used oil filter must be disposed of only at designated
disposal sites.
REMOVE CENTER ENGIEN UNDER COVER
DRAIN ENGINE OIL
Remove the oil filter cap.
Remove the oil drain plug, and drain the oil into a contain-
er.
REPLACE OIL FILTER
Using SST, remove the oil filter.
SST
09228−06501
Check and clean the oil filter installation surface.
Check the part number of the new oil filter is as same as
old one.
Apply clean engine oil to the gasket of a new oil filter.
Lightly screw the oil filter into place, and tighten it until the
gasket contacts the seat.
Using SST, tighten it an additional 3/4 turn.
SST
09228−06501
REFILL WITH ENGINE OIL
Clean and install the oil drain plug with a new gasket.
Torque: 37 N·m (378 kgf·cm, 27 ft·lbf)
1635
LU−3
LU02L−24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents