Toyota Celica 2005 Repair Manual page 1847

AX−14
SST
SST
2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U240E)
D05917
SST
D03284
D05870
D03286
− DIFFERENTIAL OIL SEAL
DIFFERENTIAL OIL SEAL
ON−VEHICLE REPAIR
1. DRAIN ATF FROM FRONT DIFFERENTIAL CASE
2. REMOVE LH AND RH DRIVE SHAFTS
(See page SA−21)
3. REMOVE LH AND RH SIDE OIL SEAL
Using SST, drive out both the side oil seals.
SST 09308−10010
4. INSTALL LH SIDE OIL SEAL
(a) Using SST and a hammer, drive in a new oil seal.
SST 09350−32014 (09351−32150), 09950−70010
(09951−07150)
Oil seal drive in depth: 2.7 ± 0.5 mm (0.106 ± 0.020 in.)
(b) Coat the oil seal lip with MP grease.
5. INSTALL RH SIDE OIL SEAL
(a) Using SST and a hammer, drive in a new oil seal.
SST 09223−00010
Oil seal drive in depth: 0 ± 0.5 mm (0 ± 0.020 in.)
(b) Coat the oil seal lip with MP grease.
6. INSTALL LH AND RH DRIVE SHAFTS
(See page SA−33)
7. FILL ATF AND CHECK ATF LEVEL
(See page DI−669)
1846
AX09M−06