SA−58
SST
Bolt
Bolt
2005 CELICA (RM1131U)
SUSPENSION AND AXLE
DISASSEMBLY
w/ ABS:
REMOVE ABS SPEED SENSOR
(a)
(b)
NOTICE:
Replace the axle hub assembly if it is dropped or a strong
shock is given to it.
(c)
NOTICE:
S
S
S
S
SST
F08657
−
REAR AXLE CARRIER
Using a pin punch and hammer, drive out the 2 pins and
remove the 2 attachments from SST.
SST
09520−00031 (09520−00040, 09521−00020)
Mount the axle hub assembly in a soft jaw vise.
Using SST and 2 bolts (Diameter: 12 mm, Pitch: 1.5 mm),
remove the ABS speed sensor.
SST
09520−00031 (09520−00040, 09521−00020),
09950−00020
Do not allow any foreign matter sticking to the sensor
rotor.
Pull out the ABS speed sensor straightly not to dam-
age the sensor rotor.
If damage has occurred to the sensor rotor, replace
the axle hub assembly.
Do not scratch the contacting surface of the axle hub
and speed sensor.
1964
SA1L8−06