Toyota Celica 2005 Repair Manual page 2118

SUPPLEMENTAL RESTRAINT SYSTEM
SST
SST
SST
SST
2005 CELICA (RM1131U)
(a) Check functioning of the SST.
CAUTION:
When deploying the airbag, always use the specified SST:
SRS Airbag Deployment Tool.
SST
AB0152
(1)
Battery
HINT:
Do not connect the yellow connector which will be connected
with the supplemental restraint system.
AB0158
(2)
CAUTION:
If the LED lights up when the activation switch is not being
pressed, SST malfunction is probable, so definitely do not
use the SST.
(3)
H01580
(b) Install the SST.
CAUTION:
Check that there is no looseness in the steering wheel and
steering wheel pad.
(1)
(2)
H11944
(3)
SST
NOTICE:
To avoid damaging the connector of the SST and wire har-
ness, do not lock the secondary lock of the twin lock.
H11945
2117
− STEERING WHEEL PAD AND SPIRAL CABLE
09082−00700
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip to the battery neg-
ative (−) terminal.
Press the SST activation switch, and check that the
LED of the SST activation switch lights up.
Disconnect the SST from the battery.
While turning the steering wheel right / left, remove
the 3 screws and column lower cover.
Disconnect the airbag connector of the spiral cable.
Connect the connectors of the 2 SST to the airbag
connector of the spiral cable.
09082−00700, 09082−00760
RS−17