Toyota Celica 2005 Repair Manual page 1431

2005 CELICA (RM1131U)
ENGINE MECHANICAL −
12. REMOVE IGNITION COIL (See page IG−6)
13. REMOVE SPARK PLUG (See page IG−1)
14. REMOVE PCV HOSES
15. REMOVE THROTTLE BODY
(See page SF−35 or SF−42)
16. REMOVE INJECTOR (See page SF−21)
17. 1ZZ−FE:
DISCONNECT ENGINE WIRE FROM CYLINDER HEAD
(a) Disconnect the ECT sensor connector.
(b) Disconnect the camshaft position sensor connector.
(c) Disconnect the oil control valve for VVT connector.
(d) Disconnect the 2 ground wires.
(e) Disconnect the 2 clamps and engine wire protector from
the intake manifold.
A21006
18. 2ZZ−GE:
DISCONNECT ENGINE WIRE FROM CYLINDER HEAD
(a) Disconnect the ECT sensor connector.
(b) Disconnect the camshaft position sensor connector.
(c) Disconnect the oil control valve for VVT connectors.
(d) Disconnect the oil control valve for VVTL connectors.
(e) Disconnect the oil pressure switch connector.
(f) Disconnect the 2 ground wires.
(g) Remove the 2 bolts, and disconnect the engine wire.
A10441
(h) Remove the intake manifold No. 2 insulator.
19. 1ZZ−FE:
REMOVE INTAKE MANIFOLD
(a) Disconnect the EVAP hose for ORVR.
(b) Disconnect the brake booster vacuum hose.
(c) Remove the 4 bolts, 2 nuts, intake manifold, 2 wire har-
ness stays and gasket.
A10444
1430
CYLINDER HEAD
EM−45