Toyota Celica 2005 Repair Manual page 1563

SF−42
2005 CELICA (RM1131U)
SFI − THROTTLE BODY (2ZZ−GE)
REMOVAL
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. DRAIN ENGINE COOLANT
3. REMOVE NO.2 CYLINDER HEAD COVER
4. REMOVE AIR CLEANER HOSE AND CAP WITH MAF
METER
(a) Disconnect the VSV for EVAP.
(b) Disconnect the 2 air hoses from air cleaner cap.
(c) Loosen the air cleaner hose clamp bolt.
(d) Disconnect the mass air flow meter connector.
(e) Disconnect the 3 air cleaner cap clips.
(f) Disconnect the air cleaner hose from the throttle body,
and remove the air cleaner cap together with the air clean-
er hose.
5. DISCONNECT THROTTLE BODY CONNECTOR
Disconnect the throttle body connector.
B16662
6. DISCONNECT THROTTLE BODY WIRE HARNESS
CLAMP
Remove the bolt and disconnect the throttle body wire harness
clamp from the throttle body.
7. REMOVE THROTTLE BRACKET
Remove the 2 bolts and throttle bracket from the throttle body.
B16661
8. DISCONNECT PCV HOSE
Slid the clip and disconnect the PCV hose.
9. DISCONNECT 2 WATER BY−PASS HOSES
Slid the clips and disconnect the 2 water by−pass hoses.
B16659
1562
FI0ZS−03