Toyota Celica 2005 Repair Manual page 1977

SA−70
2005 CELICA (RM1131U)
SUSPENSION AND AXLE
REMOVAL
1.
2.
(a)
(b)
3.
(a)
(b)
Matchmarks
HINT:
At the time of installation, after stabilizing the suspension,
torque the nut.
(c)
F08633
NOTICE:
Do not turn the nut.
HINT:
At the time of installation, after stabilizing the suspension,
torque the bolt.
− REAR UPPER SUSPENSION ARM
REMOVE REAR WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
REMOVE TAILPIPE AND HEAT INSULATOR
Remove the 2 bolts, springs, gasket, 3 O−rings and tail-
pipe.
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
Remove the 4 bolts and heat insulator.
REMOVE UPPER SUSPENSION ARM
Place matchmarks on both the cam plate and suspension
member.
Remove the nut, cam plate and cam bolt.
Torque: 74 N·m (755 kgf·cm, 55 ft·lbf)
Remove the bolt, nut and upper suspension arm.
Torque: 74 N·m (755 kgf·cm, 55 ft·lbf)
1976
SA1PD−02