Toyota Celica 2005 Repair Manual page 1447

80 − 100°C
SST
Both intake and exhaust
Bushing bore diameter
mm (in.)
10.285 − 10.306
(0.4049 − 0.4057)
10.335 − 10.356
(0.4068 − 0.4077)
2005 CELICA (RM1131U)
ENGINE MECHANICAL
REPLACEMENT
REPLACE VALVE GUIDE BUSHINGS
(a)
A01067
(b)
A01066
(c)
A01445
(d)
If the bushing bore diameter of the cylinder head is greater than
Bushing size
10.306 mm (0.4057 in.), machine the bushing bore to the fol-
lowing dimension:
Use STD
If the bushing bore diameter of the cylinder head is greater than
Use O/S 0.05
10.356 mm (0.4077 in.), replace the cylinder head.
(e)
− CYLINDER HEAD
Gradually heat the cylinder head to 110 − 130 °C (230 −
266 °F).
Using SST and a hammer, tap out the guide bushing.
SST 09201−01055, 09950−70010 (09951−07100)
Using a caliper gauge, measure the bushing bore diame-
ter of the cylinder head.
1ZZ−FE:
Select the new guide bushing (STD or O/S 0.05).
10.335 − 10.356 mm (0.4068 − 0.4077 in.)
1ZZ−FE:
Gradually heat the cylinder head to 80 − 100 °C (176 −
212 °F).
1446
EM−61
EM05X−14