Toyota Celica 2005 Repair Manual page 1477

O−Ring
2005 CELICA (RM1131U)
ENGINE MECHANICAL −
DISASSEMBLY
1. M/T:
REMOVE FLYWHEEL
2. A/T:
REMOVE DRIVE PLATE
3. INSTALL ENGINE TO ENGINE STAND FOR
DISASSEMBLY
4. REMOVE TIMING CHAIN AND SPROCKETS (See page
EM−19)
5. REMOVE ENGINE WIRE
6. REMOVE CYLINDER HEAD (See page EM−44)
7. 1ZZ−FE:
REMOVE OIL DIPSTICK AND GUIDE
(a) Remove the bolt and oil dipstick and guide.
(b) Remove the O−ring from the dipstick.
8. REMOVE WATER BYPASS PIPE
Remove the 2 nuts, bolts and water bypass pipe.
9. REMOVE THERMOSTAT (See page CO−9)
10. REMOVE KNOCK SENSOR
11. REMOVE ENGINE COOLANT DRAIN UNION
A01152
12. REMOVE OIL PUMP (See page LU−9)
13. 2ZZ−GE:
REMOVE VENTILATION CASE
(a) Remove the 3 nuts, ventilation case and gasket.
(b) Remove the clip and No. 3 ventilation hose.
A10400
1476
CYLINDER BLOCK
EM−91
EM163−06