Toyota Celica 2005 Repair Manual page 1724

MX−6
B
A
2005 CELICA (RM1131U)
MANUAL TRANSAXLE (C56)
16.
Remove the bolt and disconnect the tube clamp.
F08863
17.
(a)
(b)
D07832
(c)
CAUTION:
Do not attempt to hang the engine by hooking the chain to
any other part.
18.
D07384
19.
Lower the transaxle side, and remove the bolt and engine left
mounting bracket.
20.
CAUTION:
Make sure that the vehicle is securely supported.
21.
D07385
− MANUAL TRANSAXLE UNIT
DISCONNECT TUBE CLAMP
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
ATTACH ENGINE SLING DEVICE TO ENGINE HANG-
ER
Disconnect the 2 PCV hoses.
Install the No. 1 and No. 2 engine hangers in the correct
direction.
Parts No.:
No. 1 engine hanger: 12281−22021
No. 2 engine hanger: 12281−15040 or 12281−15050
Bolt: 91512−B1016
Torque: 38 N·m (387 kgf·cm, 28 ft·lbf)
Attach the engine chain hoist to the engine hangers.
REMOVE ENGINE LEFT MOUNTING BRACKET 3 SET
BOLTS AND NUT
Torque:
Bolt A: 60 N·m (610 kgf·cm, 44 ft·lbf)
Nut B: 80 N·m (820 kgf·cm, 59 ft·lbf)
REMOVE ENGINE LEFT MOUNTING BRACKET
Torque: 60 N·m (610 kgf·cm, 44 ft·lbf)
RAISE VEHICLE
REMOVE CENTER, LH AND RH ENGINE UNDER COV-
ERS
1723