Toyota Celica 2005 Repair Manual page 1574

2005 CELICA (RM1131U)
SFI − CAMSHAFT TIMING OIL CONTROL VALVE
REMOVAL
1. REMOVE NO. 2 CYLINDER HEAD COVER
2. 2ZZ−GE:
DISCONNECT 2 PCV HOSES, UPPER FRONT FEND-
ER APRONS EAL AND UPPER RADIATOR SUPPORT
SEAL
3. 2ZZ−GE:
REMOVE GENERATOR (See page CH−7)
4. 2ZZ−GE:
REMOVE NO. 1 VENTILATION PIPE
(a) Remove the 2 nuts, bolt and gasket.
HINT:
At the time of installation, please refer to the following items.
Use a new gasket.
(b) Remove the hose clamp and disconnect No.1 ventilation
pipe.
5. 1ZZ−FE:
REMOVE CAMSHAFT TIMING OIL CONTROL VALVE
(a) Disconnect the oil control valve connector.
(b) Remove the bolt and oil control valve.
Torque: 7.5 N·m (80 kgf·cm, 66 in.·lbf)
(c) Remove the O−ring from the oil control valve.
HINT:
At the time of installation, please refer to the following items.
Use a new O−ring.
B06691
6. 2ZZ−GE:
REMOVE 2 CAMSHAFT TIMING OIL CONTROL
VALVES
(a) Disconnect the oil control valve connector.
(b) Remove the 2 bolts and oil control valves.
Torque: 8.5 N·m (87 kgf·cm, 75 in.·lbf)
(c) Remove the O−ring from the each oil control valve.
HINT:
At the time of installation, please refer to the following items.
Use a new O−ring.
B09203
1573
SF−53
SF0ZY−10