Toyota Celica 2005 Repair Manual page 1695

CH−12
Ohmmeter
2005 CELICA (RM1131U)
CHARGING
9.
(a)
Negative (−)
Terminal
(b)
(c)
If continuity is not as specified, replace the rectifier holder.
P13566
10.
B00214
11.
(a)
B00217
(b)
Socket Wrench
B09161
(c)
(d)
B09162
− GENERATOR
INSPECT NEGATIVE RECTIFIER HOLDER
Using an ohmmeter, connect one tester probe to each
negative (−) terminal and the other to each rectifier termi-
nal.
Reverse the polarity of the tester probes and repeat step
(a).
Check that one shows continuity and the other shows no
continuity.
INSPECT FRONT BEARING
Check that the bearing is not rough or worn.
IF NECESSARY, REPLACE FRONT BEARING
Remove the 4 screws, bearing retainer and bearing.
Using SST and a press, press out the bearing.
SST 09950−60010 (09951−00350) 09950−70010
(09951−07100)
Using SST and a press, press in a new bearing.
SST 09950−60010 (09951−00530) 09950−70010
(09951−07100)
Install the bearing retainer with the 4 screws.
Torque: 3.0 N·m (31 kgf·cm, 27 in.·lbf)
1694