Toyota Celica 2005 Repair Manual page 2350

BO−44
Primer M
Primer M
2005 CELICA (RM1131U)
BODY
INSTALLATION
1.
(a)
NOTICE:
Do not heat the body excessively.
(b)
NOTICE:
Be careful not to damage the body.
(c)
2.
(a)
NOTICE:
Do not heat the moulding excessively.
(b)
NOTICE:
Be careful not to damage the moulding.
(c)
3.
Using a brush, coat the contact surface on the body with Primer
M as shown in the illustration.
A
NOTICE:
S
S
H10545
S
− ROOF SIDE MOULDING
CLEAN CONTRACT SURFACE OF BODY
Using a heat light, heat the moulding surface to 40 − 60
°C (104 − 140°F).
Using a knife, cut away any rough areas on the body.
Wipe off stains with cleaner.
If reusing the moulding:
CLEAN MOULDING
Using a heat light, heat the moulding surface to 20 − 30
°C (68 − 86°F).
Using a knife, cut the remaining adhesive from the mould-
ing.
Wipe off stains with cleaner.
COAT CONTRACT SURFACE OF BODY WITH PRIMER
"M"
Front and rear end:
A: 66 mm (2.60 in.)
Let the primer coating dry for 3 minutes or more.
Do not coat the adhesive.
Do not keep any of the opened Primer M for later use.
2349
BO2NQ−03