Toyota Celica 2005 Repair Manual page 1985

SA−78
2005 CELICA (RM1131U)
SUSPENSION AND AXLE
INSPECTION
INSPECT STABILIZER BAR LINK BALL JOINT FOR ROTA-
TION CONDITION
(a) As shown in the illustration, flip the ball joint stud back and
forth 5 times, before installing the nut.
(b) Using a torque wrench, turn the nut continuously at a rate
of 2 − 4 seconds per 1 turn and take the torque reading
on the 5th turn.
Turning torque:
Z00340
0.05 − 1.0 N·m (0.5 − 10 kgf·cm, 0.4 − 8.7 in.·lbf)
1984
− REAR STABILIZER BAR
SA1FD−06