Toyota Celica 2005 Repair Manual page 1925

SA−18
Washer
Nut
2005 CELICA (RM1131U)
SUSPENSION AND AXLE
F08617
SST
F02698
F02699
− FRONT WHEEL HUB BOLT
FRONT WHEEL HUB BOLT
REPLACEMENT
1. REMOVE FRONT WHEEL
2. REMOVE BRAKE CALIPER AND DISC
(a) Remove the 2 bolts, brake caliper and disc.
(b) Support the brake caliper securely.
3. REMOVE HUB BOLT
Using SST, 2 nuts and a screwdriver or an equivalent, remove
the hub bolt.
SST 09628−10011
4. INSTALL HUB BOLT
(a) Install a washer and nut to a new hub bolt as shown in the
illustration.
(b) Using a screwdriver or an equivalent to hold, install the
hub bolt by torquing the nut.
(c) Remove the 3 nuts and washer.
5. INSTALL DISC AND BRAKE CALIPER
Install the disc, brake caliper and 2 bolts.
Torque: 107 N·m (1,090 kgf·cm, 79 ft·lbf)
6. INSTALL FRONT WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
1924
SA1CN−06