Toyota Celica 2005 Repair Manual page 1707

Protrusion
1.5 − 2.5 mm
(0.059 − 0.098 in.)
2005 CELICA (RM1131U)
CLUTCH − CLUTCH MASTER CYLINDER
REASSEMBLY
1. COAT PARTS WITH LITHIUM SOAP BASE GLYCOL
GREASE, AS SHOWN IN ILLUSTRATION
2. INSERT PISTON WITH SPRING INTO CYLINDER
CL0528
3. INSTALL PUSH ROD
(a) Install the washer to the push rod.
(b) Push the push rod into the piston, using snap ring pliers,
install the snap ring.
4. INSTALL BOOT TO CYLINDER
5. TEMPORARILY INSTALL LOCK NUT AND CLEVIS
CL0533
6. INSTALL INLET UNION
(a) Install a new grommet.
(b) Install the inlet union.
(c) Using a pin punch (3 mm) and hammer, drive in the slotted
spring pin.
D07719
1706
CL−7
CL09M−09