Toyota Celica 2005 Repair Manual page 1706

CL−6
2005 CELICA (RM1131U)
CLUTCH − CLUTCH MASTER CYLINDER
DISASSEMBLY
1. REMOVE INLET UNION
(a) Using a pin punch (3 mm) and hammer, drive out the
slotted spring pin.
(b) Remove the inlet union.
(c) Remove the grommet.
2. REMOVE CLEVIS
Loosen the lock nut to remove the clevis and remove the lock
nut.
D07728
3. REMOVE BOOT FROM CYLINDER
4. REMOVE PUSH ROD
(a) While pushing the push rod, using snap ring pliers, re-
move the snap ring.
(b) Pull out the push rod and washer.
5. REMOVE PISTON WITH SPRING FROM CYLINDER
CL0533
1705
CL09L−10