Toyota Celica 2005 Repair Manual page 1677

(7)
(6)
(5)
(4)
Protrusion
Long
Short
(3)
(2)
(1)
2005 CELICA (RM1131U)
STARTING
(d)
(1)
Long
Short NOTICE:
Be careful to install the terminal insulator in the correct
direction.
(2)
(3)
B06329
HINT:
Match the protrusion of the insulator with the indentation of the
housing.
(e)
(4)
(5)
(6)
(7)
NOTICE:
B00215
Be careful to install the terminal insulator (inside) in the
correct direction.
(f)
− STARTER
(3) Terminal 30:
Remove the terminal nut, wave washer, terminal in-
sulator (outside), packing, O−ring, terminal bolt,
contact plate, and terminal insulator (inside).
Temporarily install a new terminal 30 kit parts.
(1) Install a terminal insulator (inside).
(2) Install a contact plate.
(3) Install a terminal bolt.
(4) Install a O−ring.
(5) Install a packing and terminal insulator (outside).
Install the packing to the terminal insulator, and
install them.
(6) Install a wave washer.
(7) Install a terminal nut.
Temporarily install new terminal C kit parts.
(1) Install a terminal insulator (inside).
(2) Install a contact plate.
(3) Install a terminal bolt.
(4) Install a O−ring.
(5) Install a terminal insulator (outside).
(6) Install a wave washer.
(7) Install a terminal nut.
Temporarily tighten the terminal nuts.
1676
ST−11