Toyota Celica 2005 Repair Manual page 2062

SR−16
2005 CELICA (RM1131U)
STEERING
DISASSEMBLY
1.
(a)
Screw
Extractor
(b)
(c)
2.
F08486
Remove the bolt and tilt steering support.
3.
Extension Bar
(a)
F08873
(b)
4.
(a)
F08874
(b)
HINT:
This bolt is left−handed one.
F08875
− TILT STEERING COLUMN
REMOVE COLUMN UPPER BRACKET AND COLUMN
UPPER CLAMP
Using a centering punch, mark the center of the 2 ta-
pered−head bolts.
Using a 3 − 4 mm (0.12 − 0.16 in.) drill, drill into the 2 bolts.
Using a screw extractor, remove the 2 bolts, column up-
per bracket and column upper clamp.
REMOVE TILT STEERING SUPPORT
REMOVE BRACKET SPACER AND 2 NO. 1 SUPPORT
COLLARS
Using an extension bar and a hammer, tap out the bracket
spacer.
Using a screwdriver, remove the 2 No. 1 support collars.
REMOVE TILT LEVER AND BREAK AWAY BRACKET
Remove the tilt spring.
Remove the No. 2 tilt lever lock bolt and No. 1 support re-
inforce.
2061
SR0YM−02