Toyota Celica 2005 Repair Manual page 2094

SR−48
SST
Oil Seal
Rack Teeth End
2005 CELICA (RM1131U)
STEERING
SST
F09887
SST
W02101
− POWER STEERING GEAR
REASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1. COAT PARTS INDICATED BY ARROWS WITH POWER
STEERING FLUID OR MOLYBDENUM DISULFIDE
LITHIUM BASE GREASE (See page SR−35)
2. INSTALL OIL SEAL
(a) Coat a new oil seal lip with power steering fluid.
(b) Install the oil seal to SST, and press them into the rack
housing.
SST 09950−60010 (09951−00240, 09951−00400,
09952−06010), 09950−70010 (09951−07360)
NOTICE:
Make sure that the oil seal is installed facing in the
S
correct direction.
Take care that the oil seal does not get reversed as
S
you install it.
3. INSTALL STEERING RACK
(a) Install SST to the rack.
SST 09631−20051
HINT:
If necessary, scrape the burrs off the rack teeth end and bur-
nish.
(b) Coat SST with power steering fluid.
(c) Install the steering rack into the rack housing.
(d) Remove the SST.
SST 09631−20051
2093
SR0YV−03