Toyota Celica 2005 Repair Manual page 1524

New O−ring
Delivery Pipe
Injector
Delivery Pipe
Spacer
O−Ring
Nylon Tube
2005 CELICA (RM1131U)
B07739
CORRECT
WRONG
B00061
O−ring
Grommet
B00062
Retainer Pipe
Housing
B06584
SST
B07690
SFI − SFI SYSTEM
(6) Put a container under the connection.
(b) Observe these precautions when removing and installing
the injector.
(1) Never reuse the O−ring.
(2) When placing a new O−ring on the injector, take
care not to damage it in any way.
(3) Coat a new O−ring with spindle oil or gasoline be-
fore installing never use engine, gear or brake oil.
(c) Install the injector to the delivery pipe and cylinder head,
as shown in the illustration. Before in installing the injec-
tor, must apply spindle oil or gasoline on the place where
a delivery pipe or a cylinder head touches on O−ring of the
injector.
(d) Observe these precautions when disconnecting the fuel
delivery pipe. The structure of the metallic connector is
shown as left.
(1) Remove the fuel pipe clamp.
(2) Get the metallic connector of the fuel tube assem-
bly, pull it out towards the rear and hold it as it is.
(3) Assemble SST to the connection as shown.
SST 09268−21010
1523
SF−3