Toyota Celica 2005 Repair Manual page 2322

BO−16
w/o Power door lock:
w/ Power door lock:
H12553
H12554
2005 CELICA (RM1131U)
BODY − FRONT DOOR
17. REMOVE DOOR GLASS FEMALE STABILIZER
Remove the screw and door glass female stabilizer.
Torque: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
N21387
18. REMOVE FRONT LOWER FRAME
(a) Remove the 2 screws.
(b) Disengage the clamp of door wire harness from the front
lower frame.
(c) Remove the front lower frame through the service hole.
(d) Remove the door glass run from the lower frame.
H12232
19. REMOVE FRONT DOOR NO. 2 WEATHERSTRIP
(a) Using a clip remover, remove the clip.
(b) Remove the front door No. 2 weatherstrip.
H12552
20. REMOVE DOOR LOCK
(a) Disconnect the 2 links from the outside handle and key
cylinder.
(b) w/o Power door lock:
Remove the nut and 3 screws.
Torque:
Nut: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
Screw: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
(c) w/ Power door lock:
Disconnect the connector and remove the bolt, nut and 3
screws.
Torque:
Nut: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
Bolt, Screw: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
HINT:
At the time of reassembly, please refer to the following
S
item.
Apply adhesive to 3 screws.
S
Part No. 08833−00070, THREE BOND 1324 or equiva-
H12811
lent
2321