Toyota Celica 2005 Repair Manual page 2068

SR−22
A
B
ACC
2005 CELICA (RM1131U)
STEERING
6.
(a)
(b)
(c)
7.
Matchmarks
F08844
8.
With the key in ACC, push into the key interlock cable and install
it.
F08860
9.
(a)
(b)
(c)
(d)
F08845
(e)
10.
Install the column upper and lower covers with the 3 screws.
11.
Install the instrument cluster finish panel with the 2 screws.
12.
Install the instrument finish panel with the 2 bolts.
13.
(a)
(b)
(c)
− TILT STEERING COLUMN
CONNECT NO. 2 INTERMEDIATE SHAFT ASSEMBLY
Align the matchmarks on the No. 2 intermediate shaft as-
sembly and intermediate extension.
Install the bolt B.
Torque: 35 N·m (360 kgf·cm, 26 ft·lbf)
Torque the bolt A.
Torque: 35 N·m (360 kgf·cm, 26 ft·lbf)
INSTALL COLUMN HOLE COVER SILENCER SHEET
A/T:
INSTALL KEY INTERLOCK CABLE
INSTALL LIGHT CONTROL SWITCH AND HEADLIGHT
DIMMER SWITCH, WIPER AND WASHER SWITCH
AND SPIRAL CABLE
Install the spiral cable.
Push into the light control switch and headlight dimmer
switch until the claw is latched.
Employ the same manner described above to the wiper
and washer switch.
Connect the airbag connector to the spiral cable.
Connect the 3 connectors to the spiral cable, light control
switch and headlight dimmer switch and wiper and wash-
er switch.
INSTALL COLUMN UPPER AND LOWER COVERS
INSTALL INSTRUMENT CLUSTER FINISH PANEL
INSTALL INSTRUMENT FINISH PANEL
INSTALL LOWER NO. 1 INSTRUMENT FINISH PANEL
Connect the connector .
Install the lower No. 1 instrument finish panel with the 2
bolts.
Connect the hood lock release lever and install the 2
screws.
2067