Toyota Celica 2005 Repair Manual page 1877

2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U341E)
PARK/NEUTRAL POSITION (PNP)
SWITCH
ON−VEHICLE REPAIR
1.
2.
D05919
3.
(a)
D05920
(b)
D05921
(c)
(d)
D05922
(e)
4.
(a)
(b)
(c)
D05923
− PARK/NEUTRAL POSITION (PNP) SWITCH
REMOVE AIR CLEANER ASSEMBLY
DISCONNECT PARK/NEUTRAL POSITION SWITCH
CONNECTOR
REMOVE PARK/NEUTRAL POSITION SWITCH
Remove the nut.
Remove the nut, washer and control shift lever.
Using a screwdriver, pry off the lock plate.
Remove the nut and lock plate.
Remove the 2 bolts and pull out the park/neutral position
switch.
INSTALL AND ADJUST PARK/NEUTRAL POSITION
SWITCH
Install the park/neutral position switch with the 2 bolts.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
Install a new lock plate and nut.
Torque: 6.9 N·m (70 kgf·cm, 61 in.·lbf)
Bend the claws on the lock plate to fix the nut.
1876
AX−7
AX0KX−02