Toyota Celica 2005 Repair Manual page 1824

SST
9.9 ± 0.3 mm
SST
2005 CELICA (RM1131U)
MANUAL TRANSAXLE (C60)
5.
(a)
(b)
(c)
6.
(a)
D07368
(b)
SST
D07369
(c)
(d)
(e)
D07371
(f)
SST
NOTICE:
When replacing the tapered roller bearing outer race, re-
place the tapered roller bearing along with it.
D07370
− DIFFERENTIAL CASE
DISASSEMBLE DIFFERENTIAL CASE
Using a pin punch and hammer, drive out the straight pin.
Remove the pinion shaft from the differential case.
Remove the 2 pinions and side gears with the 4 thrust
washers from each gear.
Transmission case side:
IF NECESSARY, REPLACE OIL SEAL AND TAPERED
ROLLER BEARING OUTER RACE
Using SST, pull out the tapered roller bearing outer race
and shim.
SST 09612−65014
Using SST and a hammer, drive out the oil seal.
SST 09226−10010
Using SST and a hammer, drive in a new oil seal.
SST 09226−10010
Drive in depth: 9.9 ± 0.3 mm (0.390 ± 0.012 in.)
Coat the lip of the oil seal with MP grease.
Place the shim into the differential case.
Using SST and a press, install the tapered roller bearing
outer race.
SST 09950−60020 (09951−00710), 09950−70010
(09951−07150)
1823
MX−51