Toyota Celica 2005 Repair Manual page 2072

SR−26
Drive Belt
Tensioner Arm
SST
2005 CELICA (RM1131U)
STEERING − POWER STEERING VANE PUMP
REMOVAL
1. REMOVE RH AND CENTER ENGINE UNDER COVERS
2. REMOVE DRIVE BELT
Loosen the drive belt tension by turning the drive belt tensioner
arm clockwise, and remove the drive belt.
3. DISCONNECT SUCTION HOSE
Remove the clip and disconnect the suction hose.
NOTICE:
Take care not to spill fluid on the drive belt.
F08868
4. DISCONNECT PRESSURE FEED TUBE
(a) Using SST, disconnect the pressure feed tube.
SST 09023−38401
(b) Remove the bolt and disconnect the pressure feed tube
clamp.
5. DISCONNECT OIL PRESSURE SWITCH CONNECTOR
6. REMOVE PS VANE PUMP ASSEMBLY
Remove the 2 pump assembly set bolts, nuts and PS vane
pump assembly.
F13578
2071
SR0YP−05