Toyota Celica 2005 Repair Manual page 1698

SST (C)
SST (C)
Turn
SST (B)
2005 CELICA (RM1131U)
CHARGING
(d)
(e)
B00224
(f)
SST (A)
(g)
B00098
(h)
Turn
SST (A)
B00322
4.
Inside
(a)
NOTICE:
Be careful of the rubber insulators installation direction.
B09165
(b)
B07734
− GENERATOR
Mount SST (C) in a vise.
Insert SST (B) into SST (C), and attach the pulley nut to
SST (C).
To torque the pulley nut, turn SST (A) in the direction
shown in the illustration.
Torque: 111 N·m (1,125 kgf·cm, 81 ft·lbf)
Remove the generator from SST (C).
Turn SST (B), and remove SST (A and B).
INSTALL RECTIFIER HOLDER
Install the 4 rubber insulators on the lead wires.
Install the rectifier holder while pushing it with the 4
screws
Torque: 2.9 N·m (30 kgf·cm, 26 in.·lbf)
1697
CH−15