RS−42
SUPPLEMENTAL RESTRAINT SYSTEM
2005 CELICA (RM1131U)
INSPECTION
Cross Section
1.
(a)
(b)
2.
H11999
(a)
(b)
CAUTION:
For removal and installation of the seatback assembly, see
page RS−40 and RS−50. Be sure to follow the correct pro-
cedure.
H11980
3.
(a)
(b)
CAUTION:
For removal and installation of the seatback assembly, see
page RS−40 and RS−50. Be sure to follow the correct pro-
cedure.
HINT:
If the seat adjuster is deformed, never repair it. Always replace
it with new one.
−
SIDE AIRBAG ASSEMBLY
Vehicles not involved in collision:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check (See page DI−884).
Do a visual check which includes the following item with
the seatback assembly installed in the vehicle.
Check that there are no cuts and cracks of the outside of
side airbag assembly.
Vehicle involved in a collision and airbag is not
deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check (See page DI−884).
Do a visual check which includes the following items with
the seatback assembly removed from the vehicle.
Check cuts and cracks of the side airbag assembly.
S
Check cuts and cracks in wire harness, and chip-
S
ping in connectors.
Vehicle involved in a collision and airbag is deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check (See page DI−884).
Do a visual check which includes the following items with
the seatback assembly removed from the vehicle.
Check the seatback installation part of the seat ad-
S
juster.
Check the damage to the connector and wire har-
S
ness.
2142
RS0K4−06