Toyota Celica 2005 Repair Manual page 2003

2005 CELICA (RM1131U)
BRAKE −
REMOVAL
1. REMOVE FRONT LH WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2. REMOVE MASTER CYLINDER (See page BR−11)
3. DISCONNECT VACUUM HOSE FROM BRAKE
BOOSTER
4. w/ ABS:
REMOVE ABS ACTUATOR ASSEMBLY
(See page BR−51)
5. REMOVE FRONT LH BRAKE LINE
SST
(a) Using SST and spanner, disconnect the brake line from
the flexible hose of front LH brake.
SST
(b) Pull out the brake line with the grommet from the body.
6. REMOVE BRAKE BOOSTER
(a) Remove the lower No. 1 panel and finish panel.
(b) Remove the return spring, clip and clevis pin.
F09531
(c) Remove the clevis and 4 nuts.
(d) Pull out the brake booster and gasket.
7. REMOVE BRAKE BOOSTER BODY SEAL
Pry out the brake booster body seal.
F09532
2002
BRAKE BOOSTER ASSEMBLY
09751−36011
BR−17
BR146−06