Toyota Celica 2005 Repair Manual page 1874

AX−4
2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U341E)
INPUT TURBIN SPEED SENSOR
ON−VEHICLE REPAIR
1.
2.
3.
4.
(a)
(b)
(c)
5.
(a)
(b)
D05897
(c)
6.
7.
8.
− INPUT TURBIN SPEED SENSOR
REMOVE BATTERY
REMOVE ECM AND ECM CASE
REMOVE ECM BRACKET
REMOVE INPUT TURBIN SPEED SENSOR
Disconnect the connector.
Remove the bolt and input turbin speed sensor.
Remove the O−ring from the input turbin speed sensor.
INSTALL INPUT TURBIN SPEED SENSOR
Coat a new O−ring with ATF and install it to the input turbin
speed sensor.
Install the input turbin speed sensor with the bolt.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
Connect the connector.
INSTALL ECM BRACKET
Torque:
Bolt: 18 N·m (185 kgf·cm, 13 ft·lbf)
Nut: 12 N·m (120 kgf·cm, 9 ft·lbf)
INSTALL ECM AND ECM CASE
Torque: 6.9 N·m (70 kgf·cm, 61 in.·lbf)
INSTALL BATTERY
1873
AX0PI−02