Toyota Celica 2005 Repair Manual page 2034

PROPORTIONING VALVE (P VALVE)
ON−VEHICLE INSPECTION
SST
1. INSTALL LSPV GAUGE (SST) AND BLEED AIR
SST 09709−29018
2. BLEED AIR FROM FLUID PRESSURE GAUGE
3. RAISE MASTER CYLINDER PRESSURE AND CHECK REAR WHEEL CYLINDER OR REAR
BRAKE CALIPER PRESSURE
1ZZ−FE engine:
Master cylinder fluid pressure
2,450 kPa (25.0 kgf/cm
7,850 kPa (80.0 kgf/cm
2ZZ−GE engine:
Master cylinder fluid pressure
2,450 kPa (25.0 kgf/cm
7,850 kPa (80.0 kgf/cm
When inspecting the fluid pressure, inspect the left font and right rear together, and the right front and left
rear together.
If the rear fluid pressure is incorrect, replace the P valve assembly.
4. BLEED BRAKE SYSTEM (See page BR−4)
5. CHECK FOR LEAKS
2005 CELICA (RM1131U)
BRAKE
2
, 355 psi)
2
, 1,139 psi)
2
, 355 psi)
2
, 1,139 psi)
2033
− PROPORTIONING VALVE (P VALVE)
Rear wheel cylinder fluid pressure
2,450 kPa (25.0 kgf/cm
3,800 kPa (38.8 kgf/cm
Rear brake caliper fluid pressure
2,450 kPa (25.0 kgf/cm
4,450 kPa (45.4 kgf/cm
BR−47
BR0QV−07
SST
F09691
2
, 355 psi)
2
, 551 psi)
2
, 355 psi)
2
, 646 psi)