Toyota Celica 2005 Repair Manual page 1842

2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U240E)
(d)
D05913
(e)
D05912
5.
6.
Check that the engine can be started with the shift lever only in
the N or P position, but not in other position.
If the engine can not be stated not as started above, carry out
the adjustment procedure (See page DI−669).
7.
8.
D05911
− PARK/NEUTRAL POSITION (PNP) SWITCH
Install the control shift lever with the nut.
Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)
Connect the control cable to the control shaft.
Torque: 12 N·m (120 kgf·cm, 9 ft·lbf)
CONNECT PARK/NEUTRAL POSITION SWITCH CON-
NECTOR
CHECK PARK/NEUTRAL POSITION OPERATION
INSTALL AIR CLEANER ASSEMBLY
TEST DRIVE VEHICLE
1841
AX−9