Toyota Celica 2005 Repair Manual page 2385

3 Clips
2 Clips
Clip
2005 CELICA (RM1131U)
BODY − INSTRUMENT PANEL
REMOVAL
1. REMOVE STEERING WHEEL PAD AND STEERING
WHEEL (See page SR−13)
2. REMOVE DOOR SCUFF PLATE
3. REMOVE COWL SIDE TRIM
4. REMOVE LOWER NO. 1 FINISH PANEL
(a) Remove the 2 screws and hood lock release lever.
(b) Remove the 2 bolts.
(c) Using a screwdriver, remove the lower No. 1 finish panel.
HINT:
Tape the screwdriver tip before use.
5. REMOVE FINISH PANEL
6. REMOVE COLUMN COVERS (See page SR−13)
7. REMOVE SPIRAL CABLE (See page SR−13)
H12618
8. REMOVE WIPER AND WASHER SWITCH AND LIGHT
CONTROL SWITCH AND HEADLIGHT DIMMER
SWITCH (See page SR−13)
9. REMOVE CLUSTER FINISH PANEL
(a) Remove the 2 screws.
(b) Using a screwdriver, remove the cluster finish panel.
HINT:
Tape the screwdriver tip before use.
10. REMOVE COMBINATION METER
H12619
11. REMOVE LOWER FINISH PANEL
(a) Remove the 2 bolts and 3 screws.
(b) Using a screwdriver, disconnect the lower finish panel.
HINT:
Tape the screwdriver tip before use.
H12620
2384
BO−79
BO2O5−02