Toyota Celica 2005 Repair Manual page 1468

EM−82
2ZZ−GE:
2005 CELICA (RM1131U)
ENGINE MECHANICAL − ENGINE UNIT
INSTALLATION
1. ASSEMBLY ENGINE AND TRANSAXLE
(C56 M/T: See page MX−9)
(C60 M/T: See page MX−9)
(U240E A/T: See page AX−35)
(U341E A/T: See page AX−35)
2. INSTALL ENGINE AND TRANSAXLE ASSEMBLY IN
VEHICLE
(a) Attach the engine sling device to the engine hangers.
(b) Slowly lower the vehicle, and raise the engine into the en-
gine compartment.
(c) Keep the engine level, and align RH and LH mountings
with the body bracket.
A10437
(d) 1ZZ−FE:
Install the RH engine mounting insulator with the 4 bolts
and 2 nuts.
Torque: 52 N·m (530 kgf·cm, 38 ft·lbf)
(e) 2ZZ−GE:
Install the RH engine mounting insulator with the 5 bolts
and 2 nuts.
Torque: 52 N·m (530 kgf·cm, 38 ft·lbf)
A10381
(f) Install the LH engine mounting through bolt and nut.
Torque: 80 N·m (816 kgf·cm, 59 ft·lbf)
3. REMOVE ENGINE SLING DEVICE
A10436
4. INSTALL REAR ENGINE MOUNTING
(a) Install the rear engine mounting bracket with the 3 bolts.
Torque: 64 N·m (653 kgf·cm, 47 ft·lbf)
(b) Temporarily install the rear engine mounting insulator with
the through bolt.
A10435
1467
EM161−04