Toyota Celica 2005 Repair Manual page 1608

B
A
B
2005 CELICA (RM1131U)
COOLING
INSTALLATION
1.
(a)
B
(b)
B
A
HINT:
B00150
Each bolt length is indicated in the illustration.
2.
(a)
(b)
HINT:
Each bolt length is indicated in the illustration.
(c)
(d)
SST
3.
4.
5.
6.
7.
B08741
− WATER PUMP
1ZZ−FE:
INSTALL WATER PUMP
Place a new O−ring on the timing chain cover.
Install the water pump with the 6 bolts.
Torque:
Bolt A 9.0 N·m (92 kgf·cm, 80 in.·lbf)
Bolt B 11 N·m (113 kgf·cm, 8 ft·lbf)
A: 30 mm (1.18 in.)
B: 35 mm (1.38 in.)
2ZZ−GE:
INSTALL WATER PUMP
Place a new O−ring on the timing chain cover.
Install the water pump with the 6 bolts.
Torque: 9.0 N·m (92 kgf·cm, 80 in.·lbf)
A: 30 mm (1.18 in.)
B: 35 mm (1.38 in.)
Install the water pump pulley.
Using SST, tighten the 4 water pump pulley set bolts.
SST 09960−10010 (09962−01000, 09963−00600)
Torque: 15 N·m (153 kgf·cm, 11 ft·lbf)
INSTALL RH ENGINE UNDER COVER
INSTALL DRIVE BELT
(See page CH−17)
FILL WITH ENGINE COOLANT
START ENGINE AND CHECK FOR LEAKS
RECHECK ENGINE COOLANT LEVEL
1607
CO−7
CO0WZ−07