Toyota Celica 2005 Repair Manual page 2346

BO−40
Adhesive Tape
2005 CELICA (RM1131U)
BODY − ROOF DRIP SIDE MOULDING
INSTALLATION
1. CLEAN BODY MOUNTING SURFACE
(a) Using a heat light, heat the body mounting surface to 40
− 60°C (104 − 140°F).
NOTICE:
Do not heat the body excessively.
(b) Remove the adhesive tape from the body.
(c) Wipe off stains with cleaner.
2. If reusing the moulding:
CLEAN MOULDING
(a) Using a heat light, heat the moulding to 20 − 30 °C (68
− 86 °F).
NOTICE:
Do not heat the moulding excessively.
(b) Remove the adhesive tape from the moulding.
(c) Wipe off stains with cleaner.
(d) Apply a new adhesive tape to the moulding.
3. INSTALL ROOF DRIP SIDE MOULDING
(a) If using a new moulding:
Secure the roof drip side moulding with the clip for tempo-
rary attachment.
H12579
(b) Install the roof drip side moulding with the 8 screws.
HINT:
When installing the moulding, tighten the screws from the rear
side to the front side of the moulding.
H12578
2345
BO2NN−02