Toyota Celica 2005 Repair Manual page 1612

10°
2005 CELICA (RM1131U)
COOLING
INSTALLATION
Upward
10°
1.
(a)
(b)
HINT:
The jiggle valve may be set within 10° of either side of the pre-
scribed position.
2.
Install the water inlet with the 2 nuts.
B00153
3.
4.
5.
− THERMOSTAT
PLACE THERMOSTAT IN CYLINDER BLOCK
Install a new gasket to the thermostat.
Install the thermostat with the jiggle valve upward.
INSTALL WATER INLET
Torque: 10 N·m (100 kgf·cm, 7 ft·lbf)
INSTALL GENERATOR AND DRIVE BELT
(See page CH−17)
FILL WITH ENGINE COOLANT
START ENGINE, AND CHECK FOR COOLANT LEAKS
1611
CO−11
CO04M−15