Toyota Celica 2005 Repair Manual page 2146

SUPPLEMENTAL RESTRAINT SYSTEM
Stripped Wire Harness Section
2005 CELICA (RM1131U)
HINT:
The airbag deploys simultaneously as the LED of SST activa-
tion switch lights up.
2.
NOTICE:
S
S
HINT:
Have a battery ready as the power source to deploy the airbag.
(a)
(b)
(c)
CAUTION:
When storing the side airbag assembly, keep the upper sur-
face of the airbag deployment side facing upward.
H11984
(d)
Wire Harness
Diameter
CAUTION:
If a wire harness which is too thin or some other thing is
used to tie down the side airbag assembly, it may be
snapped by the shock when the airbag is deployed. This is
highly dangerous. Always use a wire harness for vehicle
AB0163
use which is at least 1.25 mm
HINT:
To calculate the square of the stripped wire harness section−
− SIDE AIRBAG ASSEMBLY
DEPLOYMENT WHEN DISPOSING OF SIDE AIRBAG
ASSEMBLY
When disposing of the side airbag assembly only,
never use the customer's vehicle to deploy the air-
bag.
Be sure to follow the procedure given below when de-
ploying the airbag.
Remove the seatback assembly (See page RS−40).
Open the fastener of the seatback cover.
Remove the side airbag assembly from the seatback as-
sembly.
Using a service−purpose wire harness, tie down the side
airbag assembly to the tire.
Wire harness: Stripped wire harness section
2
1.25 mm or more (0.0019 in
Square = 3.14 x (Diameter)
2145
2
. or more)
2 2
(0.0019 in .).
2
divided by 4
RS−45