Toyota Celica 2005 Repair Manual page 1726

MX−8
A
B
2005 CELICA (RM1131U)
MANUAL TRANSAXLE (C56)
31.
(a)
(b)
32.
Using a transmission jack, support the transaxle.
D10561
33.
34.
Lower the engine left side and remove the transaxle from the
engine.
HINT:
D00193
At the time of installation, please refer to the following items.
S
S
− MANUAL TRANSAXLE UNIT
Torque:
Bolt C: 157 N·m (1,600 kgf·cm, 116 ft·lbf)
Bolt D: 157 N·m (1,600 kgf·cm, 116 ft·lbf)
Bolt E: 39 N·m (400 kgf·cm, 29 ft·lbf)
REMOVE ENGINE REAR MOUNTING INSULATOR
AND BRACKET
Remove the bolt and engine rear mounting insulator.
Torque: 87 N·m (890 kgf·cm, 64 ft·lbf)
Remove the 3 bolts and engine rear mounting bracket.
Torque: 64 N·m (650 kgf·cm, 47 ft·lbf)
JACK UP TRANSAXLE SLIGHTLY
REMOVE 4 TRANSAXLE LOWER SIDE MOUNTING
BOLTS
Torque:
Bolt A: 47 N·m (480 kgf·cm, 35 ft·lbf)
Bolt B: 23 N·m (230 kgf·cm, 17 ft·lbf)
REMOVE TRANSAXLE
Align the input shaft with the clutch disc and install the
transaxle to the engine.
Temporarily tighten the transaxle mounting bolts.
1725