Toyota Celica 2005 Repair Manual page 1952

D
C
C
Nut
2005 CELICA (RM1131U)
SUSPENSION AND AXLE
(h)
D07714
(i)
(j)
B
(k)
A
(l)
C
(m)
C
F08665
− FRONT LOWER SUSPENSION ARM
Disconnect the PS gear assembly from the suspension
member.
(1) Remove the 4 set bolts.
Torque: 58 N·m (591 kgf·cm, 43 ft·lbf)
(2) Tie the PS gear assembly to suspend it securely.
Remove the bolt A and 3 nuts, and disconnect the engine
rear mount.
Torque: 52 N·m (530 kgf·cm, 38 ft·lbf)
Remove the 2 bolts (B) and disconnect the engine front
mount.
Torque: 52 N·m (530 kgf·cm, 38 ft·lbf)
Using a transmission jack, support the suspension mem-
ber.
Remove the 6 bolts (C and D) and lower the suspension
member.
Torque:
Bolt C: 157 N·m (1,600 kgf·cm, 116 ft·lbf)
Bolt D: 39 N·m (400 kgf·cm, 29 ft·lbf)
Remove the 2 bolts, nut and lower suspension arm.
1951
SA−45