Toyota Celica 2005 Repair Manual page 2395

Outside
Front
Clip
2 Clips
8 Clips
2 Clips
2005 CELICA (RM1131U)
BODY − ROOF HEADLINING
10. REMOVE REAR SEAT OUTER BELT FLOOR AN-
CHORS
HINT:
At the time of installation, please refer to the following item.
Install the rear seat outer belt floor anchor as shown in the il-
lustration.
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
H12601
11. REMOVE QUARTER TRIM PANEL
(a) Using a screwdriver, remove the quarter trim panel.
HINT:
Tape the screwdriver tip before use.
(b) Employ the same manner described above to the other
side.
12. REMOVE FRONT SEAT OUTER BELT SHOULDER AN-
CHOR
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
H12593
13. REMOVE ROOF SIDE INNER GARNISH
(a) Using a screwdriver, open the cap of coat hook.
HINT:
Tape the screwdriver tip before use.
(b) Remove the screw and coat hook.
H05840
(c) Using a screwdriver, remove the roof side inner quarter.
HINT:
Tape the screwdriver tip before use.
(d) Employ the same manner described above to the other
side.
H12594
14. REMOVE FRONT PILLAR GARNISH
(a) Using a screwdriver, remove the front pillar garnish.
HINT:
Tape the screwdriver tip before use.
(b) Employ the same manner described above to the other
side.
15. REMOVE COWL SIDE TRIMS
16. REMOVE FRONT DOOR OPENING TRIMS
H12584
2394
BO−89