Toyota Celica 2005 Repair Manual page 2317

15 °
Clip
2005 CELICA (RM1131U)
DISASSEMBLY
1.
Pull off the snap ring with a shop rag and remove the regulator
handle and plate.
BO0020
HINT:
15 °
Front
H12661
2.
Using a screwdriver, remove the lower frame bracket garnish.
HINT:
Tape the screwdriver tip before use.
H12225
3.
Using a screwdriver, remove the No. 2 door inside handle bezel.
HINT:
Tape the screwdriver tip before use.
H12226
4.
Using a screwdriver, remove the remote control mirror switch,
then disconnect the connector.
HINT:
Tape the screwdriver tip before use.
H12227
BODY − FRONT DOOR
w/o Power window:
REMOVE REGULATOR HANDLE
At the time of reassembly, please refer to the following
S
item.
With door window fully closed, install the plate and regula-
S
tor handle with the snap ring in the position within ± 15°
as shown in the illustration.
REMOVE LOWER FRAME BRACKET GARNISH
REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL
REMOVE REMOTE CONTROL MIRROR SWITCH
2316
BO−11
BO2OJ−02